We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Cutting products.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Cutting products×フジカ工業 - List of Manufacturers, Suppliers, Companies and Products

Cutting products Product List

1～15 item / All 17 items

Displayed results
Polycarbonate impact-resistant machined products

Polycarbonate impact-resistant machined products

Polycarbonate is a material with excellent impact resistance. We can accept prototype machining of parts that require impact resistance starting from one piece.

Polycarbonate is the only transparent material among general-purpose engineering plastics. It boasts excellent impact resistance, making it suitable for places where acrylic or transparent PVC are not appropriate. The cloudiness of the cut surface can be restored to transparency through polishing.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane hardness 90 cast and machined products

Urethane hardness 90 cast and machined products

Urethane rubber with a hardness of 90 is a strong rubber that is resistant to abrasion. Urethane is poured in liquid form, solidified, and then shaped through machining.

Urethane rubber is a type of rubber that excels in wear resistance and mechanical strength. It is cast into a certain size and then machined down. Additionally, urethane comes in a range of hardness, from hard to soft, and can also be colored.

  • roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bush urethane rubber cast and machined products

Bush urethane rubber cast and machined products

Bushings are often made of highly abrasion-resistant urethane rubber. They are initially molded into rough sizes and then finished through machining.

This is a process where urethane rubber is poured into a mold and solidified, followed by machining with a lathe or router end mill. It is particularly excellent in wear resistance and weather resistance, has very strong tear resistance, and also possesses oil resistance, making it suitable for outdoor use and machine integration. It has a wide range of hardness, typically from 50° to 90°, with a proven track record in processing.

  • Other Auto Parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PEEK high-temperature high-strength machined products

PEEK high-temperature high-strength machined products

PEEK has the highest class of heat resistance and strength among resins, and there are reinforced versions with carbon and other materials. We accept inquiries for machined products made from high heat-resistant and high-strength materials.

Polyether ether ketone is a representative of super engineering plastics. Although it is expensive, it is a highly functional material. It has top-class heat resistance among thermoplastic resins and also excels in mechanical strength and chemical resistance. We mainly handle machining, so please feel free to consult with us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polycarbonate hook machining product

Polycarbonate hook machining product

Polyca performs both machining and injection molding. Please use machining for the production of small parts like hooks.

Abbreviated as polycarbonate, it is a resin that excels in impact resistance among high-transparency resins. Due to its high insulation resistance and dielectric strength, it is also used in electrical products. It is commonly seen in discs such as CDs and DVDs.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Neoprene rubber machined product, one-of-a-kind.

Neoprene rubber machined product, one-of-a-kind.

Neoprene rubber is a popular material, so we can also accept one-off items. Machining is often used for prototypes, so please feel free to consult with us.

CR rubber is a representative rubber with versatile performance. It can create three-dimensional R shapes by cutting. It is suitable for prototyping as it can be made even in small quantities.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polycarbonate pipe machining products

Polycarbonate pipe machining products

Due to the transparent resin, machining may cause cloudiness. The machined surface from the pipe material can also regain transparency through chemical treatment.

PC is the only transparent material among general-purpose engineering plastics and boasts exceptional impact resistance. It is said to have impact resistance 200 times that of glass and 50 times that of acrylic. Additionally, it excels in dimensional stability, weather resistance, and insulation resistance, with a usable temperature range of approximately -100°C to about 140°C.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane hardness 90 cast and machined products

Urethane hardness 90 cast and machined products

Urethane is poured as a liquid material, solidified, and then shaped through cutting processes. Molding and cutting processes are also possible for materials softer than hardness 90.

Urethane rubber is a type of rubber that excels in wear resistance and mechanical strength. It is cast into a certain size and then machined down. Additionally, urethane comes in various forms, from hard to soft, and can also be colored.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicon 70° Pre-production prototype machined product

Silicon 70° Pre-production prototype machined product

Pre-production prototypes can be made with silicone 70° material. Since pre-production prototypes are in small quantities, machining without molds is recommended.

It is silicone rubber known for its high heat resistance and hygiene. With a relatively hard 70° among silicones, it has a good hardness that is not too soft for machining. Please feel free to inquire about other hardness and colors.

  • Water Activation Device
  • Other water treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PVC Gray Machined Product

PVC Gray Machined Product

PVC is suitable for machining, and subsequent bonding or welding processes are also good. We handle a lot of machining for both gray and transparent materials.

PVC, commonly seen in everyday gray vinyl, is an inexpensive material that is easy to process through bending, welding, and gluing, and is used in a wide range of fields. It has excellent chemical resistance and weather resistance, and its flame retardant properties help prevent the spread of fire. There is also transparent vinyl available. We also accept connections with commercially available PVC standard products, such as those used for plumbing.

  • Other laboratory equipment and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Juralon plate machining products

Juralon plate machining products

We offer processing of plates utilizing the low wear coefficient of Duracon. Please make use of our precise machining for plates and rolls.

POM takes advantage of its excellent durability and is used as an alternative to metal parts. It can also be used for gears, bearings, pulleys, and rollers that require fatigue resistance and wear resistance. It has strong properties against solvents and low water absorption, which provides high dimensional stability during processing, making it suitable for machining and welding.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hemisal 15 Insulation Material Machined Products

Hemisal 15 Insulation Material Machined Products

Hemisal 15 is a non-asbestos rigid insulation material. It is inexpensive as insulation material and is often used for machining.

Hemisal 15 is a heat-insulating board made by Nichias, composed of a mixture of cement and glass fibers. It is a material with high mechanical strength, good dimensional stability, and processability. It is sometimes used as a cement board for electrical insulation.

  • Electric furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTFE round bar machining products

PTFE round bar machining products

We handle a lot of machining processes such as turning and machining of PTFE. Please feel free to leave the cutting process from round bars and pipes to us.

Fluororesin has excellent heat resistance and chemical resistance, and it is the material with the least wear among all substances. It also excels in non-stick properties and is used for coatings on frying pans. It is also widely used in the food and pharmaceutical industries.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane 90° thin-walled machined product

Urethane 90° thin-walled machined product

Urethane can be machined with tools like routers to create shapes. For thin materials, careful adjustments are made while gradually reducing the thickness.

This is a process where urethane rubber is poured into a mold and solidified, then machined using a lathe or router end mill. This is something like a veneer that has been shaved down to a thickness of 0.5mm. However, the thickness is the target. Urethane rubber is particularly excellent in abrasion resistance and weather resistance, has very strong tear resistance, and also possesses oil resistance, making it suitable for outdoor use and machine integration.

  • Powder Molding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MC Nylon milling processing warp prevention

MC Nylon milling processing warp prevention

The nylon was processed after being warped in the opposite direction as a warp prevention measure. The milling can be done on the entire surface, but caution is needed regarding warping when the area is large.

We handle MC nylon in blue from manufacturers such as Mitsubishi, Mitsuboshi, and Nack. Here, we have reinforced the screw holes by inserting an insert into the pilot hole. Care was taken in the manufacturing process to ensure that the three plates slide smoothly by aligning with the protrusions.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.